:: Architectural    Documentation

:: Engineering    Documentation

:: Building Information     Modeling

:: Computer Aided Facility     Management

:: Paper to CAD/BIM

:: Imaging & 3D Modeling


:: Mapping & GIS Data

:: Data Capture & Conversion





 

:: Building Information Modeling                                                       View Projects
 

:: Creation of 3D Revit model for a 43,000 SFT auditorium (over two levels, 12 screens)

USA


 
 

  The model was created from a set of 2D Construction Documents.
  High level of detail – modeled for “construction”. 
  Families were used for doors / windows, furniture, signage, handrails, HVAC      equipment etc.


 
:: Creation of 3D Revit model from as-built drawings...       View Projects
 
Creation of 3D Revit model from as-built drawings, measured survey sketches and photographs for a 22,000 SFT Bank (two levels + basement)

 USA
 
  Work done in two phases
  Model for existing condition was done in the first phase with very high level      of detail
  Families were created for doors / windows, partitions, signage, handrails,      faccedil;ade decorative elements etc.

  In the second phase:

  The above model was edited based on architect’s mark-ups to reflect design   changes for renovation based on historic conservation.



 
:: Creation of 3D Revit model for a 8,000...                        View Projects
 
 Creation of 3D Revit model for a 8,000 SFT single family residence (one level+ basement)

USA

  3D Revit modeling through the DD phase, including site layout – modeled          for “visualization”
  Rendering
  Families were created for doors / windows, furniture, handrails etc.

 

 
:: Creation of 3D Revit model for a 7,700...                                View Projects
 
Creation of 3D Revit model for a 7,700 SFT single family residence (2 levels + Basement)
 
USA

  3D Revit model created from a set of 2D Design Documents.for      visualization”
  High level of detail – modeled for “construction”.
  Families were used for doors / windows, furniture, lighting fixtures,      handrails, etc.



 
:: Creation of 3D Revit family contents ...                           View Projects
 


Creation of 3D Revit family contents (5000 objects for a very large Retail chain)

USA

 The objects mainly comprised furniture, casework, doors / windows, signage,  equipment and fixtures.

 Inputs were sheets from manufacturer’s catalogs :
 
  Created customized templates
  Created standard component libraries
  Created highly accurate Families, using the component families as nested      objects, modeled to a high level of detail
  Extensive use of visibility, dimensional and material parameters to generate      different objects from the same master family
  All the families will flex.
     Purpose : for layout design of new stores and subsequent manufacture of      customized items



 
:: Creation of 3D Revit family contents ...                           View Projects
 


Creation of 3D Revit family contents (objects for a very large Architectural firm)

USA

 The objects mainly comprised chairs, sofas, beds etc

 Inputs were sheets from manufacturer’s catalogs :
 
  Created Families, modeled to a high level of detail
  Rendered at 300 dpi
  Created highly accurate Families, using the component families as nested      objects, modeled to a high level of detail
     Purpose : Design visualization and presentation


 
     
















Copyright 2004-05 CADWORLD INFOSYSTEMS PRIVATE LIMITED, All rights reserved.
faq downloads contact us