:: Creation of 3D Revit model for a 43,000 SFT auditorium (over two levels,    12 screens)

   USA

   The model was created from a set of 2D Construction Documents.

   High level of detail – modeled for “construction”.

   amilies were used for doors / windows, furniture, signage, handrails, HVAC       equipment etc.

:: Creation of 3D Revit model from as-built drawings, measured survey    sketches and photographs for a 22,000 SFT Bank (two levels +    basement)

   USA

    Work done in two phases

    Model for existing condition was done in the first phase with very high level of        detail

    Families were created for doors / windows, partitions, signage, handrails, façade        decorative elements etc.

   In the second phase:

   The above model was edited based on architect’s mark-ups to reflect design      changes for renovation based on historic conservation.

:: Creation of 3D Revit model for a 8,000 SFT single family residence (one    level + basement)

   USA

   3D Revit modeling through the DD phase, including site layout – modeled for      “visualization”

    Rendering

    Families were used for doors / windows, furniture, lighting fixtures, handrails,        etc.

:: Creation of 3D Revit model for a 7,700 SFT single family residence (2    levels + Basement)

   India

    3D Revit model created from a set of 2D Design Documents.

    High level of detail – modeled for “construction”.

    Families were used for doors / windows, furniture, lighting fixtures, handrails,        etc.




:: Creation of 3D Revit family contents (5000 objects for a very large Retail    chain)

   USA

    The objects mainly comprised furniture, casework, doors / windows, signage,       equipment and fixtures.

    Inputs were sheets from manufacturer’s catalogs :

                 Created customized templates

                 Created standard component libraries

                 Created highly accurate Families, using the component families as                     nested objects, modeled to a high level of detail

                 Extensive use of visibility, dimensional and material parameters to                     generate different objects from the same master family

                 All the families will flex.

    Purpose : for layout design of new stores and subsequent manufacture of        customized items



:: Creation of 3D Revit family contents (objects for a very large    Architectural firm)

   USA

    The objects mainly comprised chairs, sofas, beds etc

    Inputs were sheets from manufacturer’s catalogs.

    Created Families, modeled to a high level of detail

    Rendered at 300 dpi

    Purpose : Design visualization and presentation